Just finished the expansion chambers for my 1KT bike. My goal was performance, ground clearance and weight ...in that order. It seems like they will do the job well.
For the construction I used 0.7mm mild steel and autogenous Tig welding. For the end cans, I'm going to try stainless steel, mostly for testing my skills rather than appearance...
The design is based on TSI spec exhausts for Rd500 (lower cylinders).
Nice job!
ReplyDelete(pain)
Thanks Nick.
ReplyDeleteΗ δικια μου ειναι καλυτερη ΝΙΑ ΝΙΑ ΝΙΑ :PPP
ReplyDeleteVag
Indeed very nice job !!!
ReplyDeleteNick get ready for a pair of RS250ex !!!
Παρακαλώ όπως το αλεξιανέμιο του TZR
ReplyDeleteαντικατασταθεί πάραυτα με αλεξιανέμιο τύπου bikini.
Αναμένω τας ενέργειάς σας.
Ευχαριστώ εκ των προτέρων,
μετά τιμής,
Kotsos
Δεν έχεις και άδικο ρε Κώστα.
ReplyDeleteΈβαλα τα ferings και οι εξατμίσεις θαφτήκανε... δεν πειράζει, αναγκαίο κακό. Το θέμα είναι ότι το σχέδιο βγήκε, μια χαρά εξατμίσεις και χαλαρά έχουν το καλύτερο ground clearance που έχω δει ποτέ.
Ευτυχώς, μέχρι στιγμής όλα πάνε καλά...
Τέχνη...απλά
ReplyDeletewell done my friend
ReplyDeletenice! and you think that exhaust TSI are better than the F3 or Jolly?
ReplyDeleteJose989
Hi Jose.
ReplyDeleteI don't want to compare the different exhausts - dimensions, that's what everyone does and it does not suit me.
What I do know, is that I've used 3-4 different set of expansion chambers (all aftermarket exhausts plus a few stock ones modified in different ways) and the TSI spec is my favorite one.
τις πουλας? Δημητρης motomaniac
ReplyDeleteΔημήτρη, τις έχω δώσει εδώ και καιρό...!
ReplyDeleteWill you plz post the design of the chamber
ReplyDeleteDo you sell this item??
ReplyDelete