Quick and dirty modification that allows the use of HRC cards on a stock MC28 wiring loom. Modification is easily reversible by removing the jumpers that were salvaged from a highly damaged Mc21 wiring loom.
Top jumper shorts Oil switch (Green/ Pink) to Ground.
Bottom jumper shorts Side Stand switch (Green/ White) and also GPS - Neutral switch (Light Green/ Red) to Ground.
For references I've used Matt Patterson's article :
and also Phil Mellor's similar modification :
Bottom jumper shorts Side Stand switch (Green/ White) and also GPS - Neutral switch (Light Green/ Red) to Ground.
P.s According to my findings so far, not all three grounding points are needed though I don't have a HRC card to try at the moment and I just started researching PGMIV units so I might be wrong. Have fun. Nick
Comments
Post a Comment