Nsr250 Mc28 - HRC Memory Card, Loading new ignition map

Here is a photo of an HRC memory card loading data to the main EEPROM of the PGMIV. Loading of the ignition map and data takes about half a minute, and it only happens once. After that, the PGM4 unit remembers the HRC card and is ready to run immediately. 

There is an exception to this, and that is when you're using more than one HRC card. In this case, data loading to the PGMIV happens each time you change the HRC card. e.g., changing from P - 010 to P - 030 ignition map. 

PGMIV will only remember the last HRC card that you used. 

This never happens with the stock memory card as it's hardcoded to the PGM unit and always starts immediately.